| A2000 Specifications |
|
Power:
|
|
| Power Supply: |
120V/60 Hz |
| Motor Voltage: |
24V DC |
| Thermal Protection: |
Automatic |
| Travel Rate-Main: |
5.5 in./sec. approx. |
| Line Cord: |
6’ (3-Prong) |
| Push & Pull force: |
700 Newtons Max. |
Factory Set Force Adjustment:
|
Independently adjustable up/down if required
|
| Logic Type: |
Microprocessor with Built-in Surge Suppressor |
| Limit Settings: |
Electronic |
| Low Voltage Connections: |
Screwless (Easy connect) |
| Display: |
8-LED carousel |
| Lighting System: |
Time Controlled 1 bulb, 60W max. |
Lens Cover:
High Impact, heat resistant,
UL recognized plastic |
(1) Lens Cover
|
| Rail:
|
|
| One Piece, Galvanized Steel C-channel preassembled: |
10’ 3/4” |
| System Length (overall for 7 ft. door): |
10’ 10” |
| Headroom Clearance: |
3/4” |
| Trolley: |
Includes emergency release, easy reconnect |
| Radio Controls: |
|
| Frequency: |
315MHz (HomeLink compatible) |
| Code Technology: |
Multibit code |
| Receiver: |
Modular, wireless code learning |
| Digital Transmitters: |
|
| Included Transmitters: |
2-channel MINI - (1) |
| Other Available Transmitters: |
4-channel MINI
3-channel MICRO
|
| Operating Range: |
100 ft. approx. |
| Battery: |
One 3V battery |
| Wired Controls: |
Modular Multi-Function Wall Control with Vacation/Lock Switch |
| Safety, Convenience & Other Features: |
|
| Safety: |
Infared photo eye protection system
Inherent reversal system (max. force and self learn)
Limited to max 30 sec. run time
Manual/emergency release
Flashing light during/after obstructed condition |
| Self Learn Force System: |
Monitors and controls motor force every cycle (Smart Motor) to optimize force requirements. |
| Soft Start/Soft Stop: |
Electronically Controlled |
| Diagnostic System: |
LED Indicator |
| Warranty: |
Limited manufacturer's lifetime warranty on operator and rail (excludes accessories, photo eyes, and labor), subject to regular maintenance on door and original homeowner. |
| Product Certifications: |
UL, C-UL, CSA, FCC, IC |
